Whether you have decided to paint your own windows and trim to save money or because you enjoy DIY projects isn’t important, what’s important is that you prepare for the job and make sure you do it right!
Typically, there is a lot more prep work associated with painting doors, windows and trim when compared to simple wall painting with latex based paints. Because of this extra work and expense we want to make sure to do the job right the first time. It’s much easier and cheaper to do it right the first time than to come back later and fix mistakes.
Some of the recommended steps to take when painting windows and trim with oil based paints:
- Strip off the old paint, right down to bare wood if possible (use a heat gun, chemical stripper or sandpaper)
- Sand the bare surface smooth and remove protruding nails and screws (or nail them in all the way if you don’t feel comfortable removing them)
- Clean the sanded surface and apply filler putty to smoothen further if needed. This is usually not necessary unless you have a very old home or poor quality wood. This will require sanding again to smoothen out.
- Thoroughly vacuum and wipe clean with a tack rag or a clean cloth if you don’t have a tack rag (sticky cloth that picks up particles and dust).
- Carefully and thoroughly apply a base or primer coat according to the manufacturer’s directions.
- Paint
It may seem like a lot of work (it is) but by taking care and following the proper steps you will end up with a fantastic looking final result. As you’ve probably noticed, prepping and cleaning the piece you will be painting is very important. Painting an ugly, uneven, cracked surface will only result in a poor paint job… don’t forget that.
A few more tips that are sure to help you save a lot of work and frustration:
- Always spend a few more dollars for quality brushes
- Make sure to reduce your paint with mineral spirits (for oil based paint) to make it slightly more runny. Apply thin, even coats. This will require a few extra coats but the thinner paint will settle better and your surface will be as smooth as glass! (consult the pros at the local paint store on reducing instructions)
- Apply masking tape along the glass on your windows, it’s easier than scraping off paint with a razor blade.
- Newspapers, nylon or canvas on the floor will save your hardwood and carpets!
Make sure you take your time and do a good job. DIY projects can be very rewarding and add a lot of value to your home.
A final note: Always take your personal safety and the safety of others seriously. Obey all warning labels and be very careful with chemicals and sources of heat. Paint and chemicals are inflammable so take care to prevent fires.